|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Solid State Relay OCMOS FET PS710B-1A,PS710BL-1A 6-PIN DIP, 0.05 LOW ON-STATE RESISTANCE 2.5 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET DESCRIPTION The PS710B-1A and PS710BL-1A are solid state relays containing a GaAs LED input side and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance. The PS710BL-1A has a surface mount type lead. FEATURES * Low on-state resistance (Ron = 0.05 TYP.) * Large continuous load current (IL = 2.5 A) * 1 channel type (1 a output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6-pin DIP) * Low offset voltage * PS710BL-1A: Surface mount type APPLICATIONS * Measurement equipment * FA equipment Document No. PN10064EJ02V0DS (2nd edition) Date Published February 2003 CP(K) The mark shows major revised points. PS710B-1A,PS710BL-1A PACKAGE DIMENSIONS (UNIT: mm) PS710B-1A 9.250.5 TOP VIEW 6 5 4 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 1 2 3 7.62 6.50.5 3.30.3 4.150.3 3.50.3 0.50.1 1.340.1 0.25 M 0 to 15 2.54 PS710BL-1A 9.250.5 6 5 4 TOP VIEW 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 1 2 3 6.50.5 3.50.3 1.340.1 0.25 M 2.54 0.90.25 9.600.4 2 Data Sheet PN10064EJ02V0DS 0.10+0.10 -0.05 PS710B-1A,PS710BL-1A MARKING EXAMPLE No. 1 pin Mark PS710B-1A NE000 Country Assembled Type Number Assembly Lot N 0 00 Week Assembled Year Assembled (Last 1 Digit) In-house Code Rank Code Nothing Solder Dipping E Solder plating Data Sheet PN10064EJ02V0DS 3 PS710B-1A,PS710BL-1A ORDERING INFORMATION (Solder Contains Lead) Part Number Package Packing Style Application Part Number *1 PS710B-1A PS710BL-1A PS710BL-1A-E3 PS710BL-1A-E4 6-pin DIP Magazine case 50 pcs PS710B-1A PS710BL-1A Embossed Tape 1 000 pcs/reel *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number Package Packing Style Application Part Number *1 PS710B-1A-A PS710BL-1A-A PS710BL-1A-E3-A PS710BL-1A-E4-A 6-pin DIP Magazine case 50 pcs PS710B-1A PS710BL-1A Embossed Tape 1 000 pcs/reel *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10064EJ02V0DS PS710B-1A,PS710BL-1A ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current MOS FET Load Voltage Continuous Load Current *2 *1 Symbol IF VR PD IFP VL Connection A Connection B Connection C IL Ratings 50 5.0 50 1 60 2.5 3.5 5.0 Unit mA V mW A V A Pulse Load Current *3 ILP 5.0 A (AC/DC Connection) Power Dissipation Isolation Voltage *4 PD BV PT TA Tstg 625 1 500 675 -40 to +85 -40 to +100 mW Vr.m.s. mW C C Total Power Dissipation Operating Ambient Temperature Storage Temperature *1 PW = 100 s, Duty Cycle = 1% *2 Conditions: IF 2 mA. The following types of load connections are available. 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 IL L - + VL (DC) Connection A IL VL (AC/DC) L L + VL (DC) - IL Connection B IL L IL + IL Connection C + VL (DC) - 4 IL *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output Data Sheet PN10064EJ02V0DS 5 PS710B-1A,PS710BL-1A RECOMMENDED OPERATING CONDITIONS (TA = 25C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Output Capacitance Coupled LED On-state Current On-state Resistance Turn-on Time Turn-off Time *1, 2 *1, 2 Symbol VF IR ILoff IF = 10 mA VR = 5 V VD = 60 V Conditions MIN. TYP. 1.2 MAX. 1.4 5.0 50 Unit V A nA Cout IFon Ron ton toff RI-O CI-O VD = 0 V, f = 1 MHz IL = 2.5 A IF = 10 mA, IL = 2.5 A, t 10 ms IF = 10 mA, VO = 5 V, RL = 500 , PW 10 ms VI-O = 1.0 kVDC V = 0 V, f = 1 MHz 10 9 500 2.0 0.05 2.5 0.05 0.1 5.0 0.2 pF mA ms Isolation Resistance Isolation Capacitance 0.5 pF *1 Test Circuit for Switching Time IF Pulse Input VL Input 50% 0 VO = 5 V Input monitor VO monitor Output 90% Rin RL ton 10% toff *2 The turn-on time and turn-off time are specified as input-pulse width 10 ms. Be aware that when the device operates with an input-pulse width of under 10 ms, the turn-on time and turn-off time will increase. 6 Data Sheet PN10064EJ02V0DS PS710B-1A,PS710BL-1A TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 Maximum Forward Current IF (mA) Maximum Load Current IL (A) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 80 60 40 20 0 -25 0 25 50 75 85 100 0 25 50 75 85 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.6 Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 600 f = 1 MHz 500 400 300 200 100 Forward Voltage VF (V) 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1.2 1.0 0.8 -25 0 25 50 75 100 0 10 20 30 40 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE 10 Off-state Leakage Current ILoff (A) -6 LOAD CURRENT vs. LOAD VOLTAGE 3.0 IF = 10 mA VD = 60 V 2.0 10-7 Load Current IL (A) 1.0 10-8 10-9 -10 -0.15 -0.10 -0.05 -1.0 0 0.05 0.10 0.15 10 -2.0 10-11 0 20 40 60 80 100 -3.0 Ambient Temperature TA (C) Load Voltage VL (V) Data Sheet PN10064EJ02V0DS 7 PS710B-1A,PS710BL-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 3.0 ON-STATE RESISTANCE DISTRIBUTION 60 n = 50 pcs, IF = 10 mA, IL = 2.5 A, t 10 ms Normalized On-state Resistance Ron 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25C, IF = 10 mA, IL = 2.5 A 50 Number (pcs) 40 30 20 10 0 0 25 50 75 100 50 52 54 56 58 Ambient Temperature TA (C) On-state Resistance Ron (m) TURN-ON TIME vs. FORWARD CURRENT 30 VO = 5 V, RL = 500 TURN-OFF TIME vs. FORWARD CURRENT 0.14 0.12 VO = 5 V, RL = 500 Turn-on Time ton (ms) Turn-off Time toff (ms) 20 0.10 0.08 0.06 0.04 0.02 10 0 10 20 30 40 0 10 20 30 40 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 25 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 30 25 TURN-OFF TIME DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Number (pcs) Number (pcs) 2.6 2.7 20 15 10 5 0 20 15 10 5 0 2.3 2.4 2.5 0.03 0.04 0.05 0.06 0.08 Turn-on Time ton (ms) Turn-off Time toff (ms) 8 Data Sheet PN10064EJ02V0DS PS710B-1A,PS710BL-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized Turn-on Time ton NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized Turn-off Time toff 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25C, IF = 10 mA, VO = 5 V, RL = 500 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25C, IF = 10 mA, VO = 5 V, RL = 500 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Data Sheet PN10064EJ02V0DS 9 PS710B-1A,PS710BL-1A TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5 +0.1 -0 4.5 MAX. 16.00.3 7.50.1 10.30.1 1.550.1 12.00.1 10.40.1 0.3 4.00.1 Tape Direction PS710BL-1A-E3 PS710BL-1A-E4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 R 1.0 21.00.8 1001.0 330 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10064EJ02V0DS PS710B-1A,PS710BL-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10064EJ02V0DS 11 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of PS710BL-1A-E4-A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |